Milenyals Forum

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Leak Siemens Simcenter FloEFD 2019.4.0 v4836 for Siemens NX (x64) Multilanguage


Ultimate Poster
Half Member
Feb 25, 2019
You must be registered for see images

x64 | Languages:Multilanguage | File Size: 676 MB

FloEFD for NX applications for modeling the flow and heat transfer in liquids and gases in the environment of the corresponding CAD system.​

FloEFD is fully integrated into the environment of the corresponding CAD systems and uses solvers based on computational fluid dynamics (CFD) technology. Main advantages For CAD-dependent versions, working directly with the model in the environment of the corresponding CAD. There is no need to convert the geometry to another format, often leading to loss of quality. Delivered the task of calculating fluid dynamics and heat transfer at any time is fully synchronized with the model Minimization of efforts, and as a result, errors in the process of synchronization of the set hydro-gas-dynamic problem and model.
Automatic detection of changes in the model. There is no need for "manual" construction of the geometry describing the area occupied by the liquid / gas. Automatic determination of the area occupied by the liquid / gas. The same graphic controls are used as in other modules of the corresponding CAD. Very easy to learn. Easy to use. Uses the tree of elements of the CAD model. Intuitive and fully interactive Use when creating a project / processing the results of model elements highlighted in the graphic window / model tree
Visualization of calculation results in the form of static and animated images directly in the graphics window.Support for exporting results to MS Excel, Word. The ability to play and record animations.Support for multi-configuration models.For effective multi-parameter research, the following are implemented: the ability to clone projects, automatically start a series of calculations. It is automated in order to reduce the number of cases when it is necessary to involve specialists in the field of gas-gas dynamics and heat transfer to analyze the formulation and calculation results Reliable and fully automatic calculation grid generator A unique model of turbulence and boundary layer is used Automatic control of the convergence of the solution.
Reliable and accurate numerical methods and physical modelsA wide range of physical models Exact solution The ability to calculate very complex structures and physical phenomena.
-Analysis of hydro-aerodynamics and heat transfer of two- and three-dimensional models
-Analysis of external and internal flow flows
-Analysis of steady and unsteady flow
-Flow of incompressible fluid and compressible gas , including including a combustible mixture, at subsonic,
-Water vapor condensation
-Calculation of relative air humidity in gas flows
-Flow of non-Newtonian fluids (only laminar flow regime)
-Flow in a compressible fluid (fluid density depends on pressure)
-Flows in real gases
-Analysis of laminar, turbulent and unsteady flows
-Analysis of vortex flows and fans
-Analysis of flows with solid inclusions
-Analysis heat transfer within and between fluids and solids
-Analysis tealoperedachi inside solids in lack of washing the flux
-calculation of the contact thermal resistance
-calculation of the electric contact const otivleniya
-Thermoelectric coolers
-Heat transfer by radiation
-Joule heating
-Streams with gravitational effects (also known as the buoyancy effect)
-Porous media
-Heat pipes
-Heat transfer in printed circuit boards
-Heat transfer in perforated plates
-Flow of aerosol flows
-Accounting for body roughness during flow
-Accounting for tangential wall motion (mixing and rotation)
-Flow in rotating devices
-Cavitation in fluid flows
-Combustion in gas mixtures
Siemens Simcenter FloEFD 2019.4.0 v4836 for Siemens NX Win64
Release Year / Date:2020
Version:2019.4.0 v4836
Developer:Siemens PLM / Mentor Graphics
Interface language:English, German, French, Chinese, Japanese, Russian
Tabletka:Present (TeAM SolidSQUAD-SSQ)
OS:icrosoft Windows 7 Professional, Ultimate or Enterprise 64-bit edition, Microsoft Windows 10 Pro or Enterprise 64-bit (tested with v1809) For solver: Microsoft Windows 2012 Server x64, Windows 2012 Server R2 x64,Windows Server 2016 with HPC Pack 2016

DOWNLOAD[hide thanked=1]